West Seneca Welding is your one-stop shop for all of your
waste reduction equipment and recycling equipment needs
 

West Seneca Welding: Horizontal Balers

The EXCEL® Model EX62/EX63 bales the following materials:

Office paper Newspaper OCC Magazines PET HDPE Aluminum Cans Tin Cans Plastic Film Carpet Padding Textiles Other Materials

EX62 and EX63 Baler

The EXECL© EX62 & EX63 are designed to bale cardboard, paper, newspaper, aluminum cans, tin cans, PET, HDPE, and other recyclables. These machines produce the best mill-sized bales in the industry without preconditioning. EXCEL© Manufacturing uses only the highest quality components available for ultimate performance and reliability.

Standard Features Include:

* Hydraulic Door Latch (EX63 only)
* Regenerative Circuit (EX63 only) Reduces cycle time by 17 seconds
* The EX62 is manufactured standard with either left-hand or right-hand door swing
* 20 HP TEFC Motor, Standard Voltage - 208, 230, 460 Volt, 60 Hertz, 3 Phase
* Removeable Shear Blade with Four Cutting edges
* Six Fully Guided Wire Tie Slots
* Automatic Bale Sizing System
* Short Stroke Feature to Reduce Cycle Time
* EXCEL's® 1-2-3 Warranty (1 Year Labor, 2 Year Parts, 3 Year Structural & Cylinder)(U.S.A. only)
* Complete with MV32 Hydraulic Oil
* Remote Controls - According to Door Swing
* Safety Interlock Door with Decompression
* Clean Out Tool, Grease Gun, and Extra Touch Up Paint
* One Bundle of 12 x 13 Single Loop Wire Ties
* Paint - EXCEL® Blue
* Standard Hopper
* Lower Photo Eye
* UL, CUL, CE Approved
* PLC Controlled Operation
* Available with an EXCEL® above ground or in-ground conveyer

Back to Top

The EXCEL® Models EX66 and EX77 bale the following materials:

The EXCEL® models EX66 & EX77 are designed to be the most durable, efficient, and productive closed-end single ram baler in the industry. With EXCEL's® innovative, patented, vertical lifting door, the EX66 & EX77 distinguish themselves as the most dependable, practical and universal balers ever built in this class of balers.

Standard Features Include:

* (2) 6" (15.24 cm) Cylinders (EX66 only)
* (2) 6.5" (16.51 cm) Cylinders (EX77 only)
* Non-Ferrous Hopper (EX77 only)
* Remote Controls on Pedestal (EX77 only)
* Hardox® 400 Replaceable Wear Liners
* The EX66 & EX77 is manufactured standard with a patented, hydraulic, vertical lifting door
* 20 HP TEFC Motor, Standard Voltage - 208, 230, 460 Volt, 60 Hertz, 3 Phase
* Removeable, Turnable Serrated Shear Blade with 32 Cutting Points
* Five Fully Guided Wire Tie Slots
* Automatic Shear Jam Correction
* Automatic Bale Sizing System
* Short Stroke Feature to Reduce Cycle Time
* 29 Second Dry Cycle Time/21 Time Short Stroke (EX66 only)
* EXCEL's® 1-2-3 Warranty (1 Year Labor, 2 Years Parts, and 3 Years Structural and Cylinder) (EX66 only)(U.S.A. only)
* 1 Year Parts and Labor (EX77)
* Complete with MV32 Hydraulic Oil
* NEMA 12 rated Closures and Controls
* Full Bale Ejection
* Full Platen Penetration
* Clean Out Tool and Extra Touch Up Paint
* One Bundle of 12 x 13 Single Loop Wire Ties
* Paint - EXCEL® Blue
* Standard Hopper
* Lower Photo Eye
* UL, CUL, CE Approved
* PLC Controlled Operation
* Available with an EXCEL® above ground or in-ground conveyer for a turn-key system

Back to Top

The EXCEL® Model HV9 and HV10 bale the following materials:

The EXCEL® HV9 & HV10 have the revolutionary single sheet, interlocking construction found in our two-ram balers. The floor and side sheets are all single sheets, cut to fit together for indestructible construction. The HV9 & HV10 bale newspaper, office paper, magazines, OCC, PET, HDPE, aluminum and tin cans without preconditioning. Its extra heavy duty construction allows the HV's to also bale painted aluminum siding, radiators, aluminum extrusions, and insulated wires.

Standard Features Include:

* Patented Hydraulic Bale Pusher Bar (HV10 only) Extends to push bale beyond vertical door to allow tie off and ejection of the next bale
* The HV9 & HV10 are manufactured standard with wither left-hand or right-hand hopper and controls
* 50 HP TEFC Motor, Standard Voltage - 460 Volt, 60 Hertz, 3 Phase
* Industrial Hardened Logic Controller
* Hardox® 400 Replaceable Wear Liners
* 300 Gallon Hydraulic Resevoir with Regenerative Circuit
* One Year EXCEL® Limited Warranty (Parts & Labor)
* Tongue and Groove Corrugated Floor
* NEMA 12 rated Enclosures and Controls on Moveable Pedestal
* Castle Key Safety Interlocking System
* Full Bale Chamber Penetration
* Standard Hopper with Inspection Window
* Clean Out Tool, Grease Gun, and Extra Spray Paint
* One Bundle of 12 gauge x 13 ft. Single Loop Wire Ties
* Paint - EXCEL® Blue
* Air to Oil Heat Exchanger
* Lower Photo Eye
* UL, CUL, CE Approved
* Available with EXCEL® integrated conveyers with rubber or steel belts for a turn-key system

Back to top

The EXCEL® Model 2R63 bales the following materials:

Save time, and money, with a complete turn-key solution for your baling needs. The 2R63 two-ram, auto-tie baler chassis utilizes the same interlocking designs found in larger EXCEL® two-rams while remaining very economical. The 2R63 is constructed of four solid steel sheets (top, bottom, and both sides), providing seamless construction from end to end. Combine this innovative engineering with our use of only the highest quality components, and the result is the very best in durability and function.

Standard Features Include:

* The 2R63 is manufactured standard with either left-hand or right-hand eject
* U.S. Wire tie Systems Automatic 13 Gauge Wire Tier, Model 343
* 20 HP TEFC Motor, Standard Voltage - 208, 230, 460 Volt, 60 Hertz, 3 Phase
* 29 Second Main Ram Dry Cycle Time
* Short Stroke Selector Reduces Cycle Time to 21 Seconds
* Remote Operating Control Located on Pedestal
* Percent of Bale Complete Indicator Lights
* Automatic Bale Sizing System
* Full Platen Penetration
* Complete with MV32 Hydraulic Oil
* NEMA 12 rated Enclosures and Controls
* Power Unit Mounted on back of the Machine for Space Savings
* Air/Oil Heat Exchanger
* One Spool of 13 Gauge Ultra High Tensil Galvanized Wire
* Paint - EXCEL® Blue
* Standard Hopper
* Lower Photo Eye
* UL, CUL, CE Approved
* Available with an EXCEL® above ground or in-ground conveyer for a turn-key system

Back to Top

The EXCEL® Model 2R9/2R10 bales the following materials:

EXCEL® couples interlocking construction with the most advanced control system in the industry for an indestructable, automated 2RAM baler. EXCEL's® design for automated operation eliminates the need for a full-time operator. EXCEL's® superior quality means reduced down time, automatic operation and dramatic labor savings.

Standard Features Include:

* The 2R9/2R10 is manufactured standard with wither left-hand or right-hand eject.
* Operator-Free Operation
* 50HP TEFC Motor, Standard Voltage - 460 Volt, 60 Hertz, 3 Phase (2 - 50 HP, 2R10)
* EXCEL® Autonetics™ in with Absolute Ram Position Sensor with Electronic Display
* U.S. Wire Tie Systems Automatic 342 Tier with Turbo Motor
* Industrial Hardened Logic Controller
* Fully Lined with Hardox® 400 Replaceable Wear Liners
* 300 Gallon Hydraulic Resevoir with Regenerative Circuit (600 gallon 2R10)
* One Year EXCEL® Limited Warranty (Parts & Labor)
* Upper and Lower Photo Eyes (sender/reciever upper photo eye with integrated conveyer control)
* NEMA 12 rated Enclosures and Controls with Conveyer Starter
* Installed and Working Modem for On-Line Diagnostics
* Castle Key Saftey Interlocking Entry System
* Bale Chamber Penetration (2R9 - 27")(2R20 - 24")
* Automatic Bale Release Door
* Bale Discharge Platform
* One Spool of 12 Guage Ultra High Tensile Galvanized Wire
* Paint - EXCEL® Blue
* Air to Oil Heat Exchanger
* Integrated Steel Platen Wiper
* UL, CUL, CE Approved
* Bale Counter
* Hardened, Serrated, Turnable Cutting Knives
* Hour Meter
* 9" eject cylinder
* Separation Door for Solid Waste and Scrap Applications (Available Option)
* Available with EXCEL® integrated conveyers with rubber or steel belts for a turn-key system

Back to Top

The EXCEL® Signature Series 150 and 200 Balers bale the following materials:

EXCEL® takes durable construction and baling efficiencies to the next level. Vowing to never compromise on components or on quality in structure EXCEL® has revolutionized two ram baling with the Signature Series.

Standard Features Include:

* Two (2) 75 HP TEFC Motors, Standard Voltage - 460 Volt, 60 Hertz, 3 Phase (2- 100 HP, Signature 200)
* 900 Gallon, Hydraulic Resevoir with Regenerative Circuit (1500 Gallon Signature 200)
* Air to Oil Heat Exchanger
* EXCEL® Autonetics™ with Absolute Ram Position Sensor with Electronic Displays
* Dual Upper and Single Lower Photo Eyes (sender/reciever upper photo eyes with integrated conveyor controls)
* Industrial Hardened Logic Controller
* NEMA 12 rated Enclosures and Controls
* Installed and Working Modem for On-Line Diagnostics
* Castle Key Saftey Interlocking System
* Bale Counter
* Hour Meter
* UL, CUL, CE Approved and Rated
* U.S. Wire Tie Systems Automatic 342 Tier with Turbo Motor
* One Spool of 12 Guage Ultra High Tensile Galvanized Wire
* Hardox 400 Replaceable Wear Liners
* 32" of True Bale Chamber Penetration, (Allowing 10" of Overcharge)
* Automatic Bale Release Door
* Seperation Door for Solid Waste and Scrap Applications (Available Option)
* Integrated Steel Platen Wiper
* Paint - EXCEL® Blue (KEM 400)
* Bale Discharge Platform with CE Rated Saftey Enclosure
* One Year EXCEL® Limited Warranty (Parts & Labor)

Back to Top

West Seneca Welding
3 Roberts Avenue
Buffalo, NY 14206
Phone: 716-826-1658
FAX: 716-826-1786